This Five Oceans Fishing Power Line Hauler Pot Puller 900W was designed for pulling single creels, traps (for crab, shrimp, prawn, lobster, etc.), or creels on a string. The hauler is equipped with a foldable hauling arm allowing minimal space usage and easy storage. It has got a freely rotating lower axle and a manual pressing wheel eliminating the necessity for applying light pull on the rope. It features a Fully Demountable design making it the only Portable Line Hauler in the market. Suitable for small and midsize boats. the easiest to disassemble and store in its category.
SPECIAL NOTICE: To connect the hauler to the battery, a 2AWG cable must be used if the length of the cable from the hauler to the battery is less than 24 feet, if the length is between 24 and 50 feet, the cable must be 1AWG and must be used an 80amp circuit breaker.
SPECIFICATIONS: Voltage: 12V Hauling power (up to): 198 lb (90 kg) Hauling speed - normal load: 35 m/min Hauling speed - heavy load: 30 m/min Weight: 30 lb (13,5 kg) Power consumption - No load: 12 Amp Power consumption - Normal load: 120 Amp Power consumption - Heavy load: 165 Amp Rated power output: 900 W
DIMENSIONS: Width: 1-15/16 in (50 cm) / Height: 3-7/16 in (87 cm) Diameter Rope sheaves: 11/16 in (18 cm) Line size span: 3/16 in (4 mm) to 3/8 in (10 mm) Mounting Bracket Dimension: 5 5/8 in (127 mm) x 3 1/8 in (76 mm)
Twin Mount Bracket: Small Fuse type (automatic reset): Bimetal Fully Demountable: Yes Foldable arm: Yes Rotating axle: Yes Electrical Switch: Yes Self-haul: Yes
Loosen the hauling arm from its secure folded position and fully extend it. Press the arm gently down once fully extended and it will snap into its grip. Free the pulley from the folding arm so that it hangs freely.
Rotating Axle: Either leave the rotating axle in an unlocked position, allowing the hauler to follow the direction of the pull, or lock it in a fixed position with the nylon locking screw knob. The second stainless screw, located above the nylon locking screw knob, prevents the hauler from being lifted from its axle. It should not be unscrewed, and cannot be used to lock the position of the rotating axle.
Electrical Switch: The haulers are fitted with a forward and reverse switch, allowing the hauling wheel to be operated in both directions. The position marked (I) will rotate the hauling wheel in its normal direction and the position marked (II) will rotate it in the opposite direction.
Mounting the hauler: The hauler is mounted on the Twin Mount Bracket with the two vertical axle supports facing outwards, and the single axle support on the opposite side, facing inwards. Once in place over the Twin Mount Bracket insert the twin drop nose pin and make sure the hauler is safely secured. Open the lid of the electric socket and insert the plug by making its bulge line up with the socket's dent. Once the plug is fully inserted, rotate the locking-wheel to lock it in place.
Operating Instructions: - We recommend that a marine 12V battery with a minimum capacity of 60-80 Ah is used. - The haulers have a built- in bimetal fuse so there is no need to install an external fuse. The bimetal fuse is integrated into the motor cover and protects the heavy duty motor form both shorter current peaks and longer mid to high current intervals. It reacts to both high currents and increased temperature due to longer hauls at close to maximum working loads. The bimetal fuse automatically resets once it cools down.
MANUFACTURER & DISTRIBUTOR are not responsible for any injuries caused by improper use of the product.
We take enjoyment in the products we make and guarantee the buyer that all Five Oceans products are ready to handle the extreme conditions of the open sea or terrain. However, we also know things can happen that's why we've got you covered for a year.