CQR Style Plow Anchor, 15.5 Lb / 7 Kg, Hot Dipped Galvanized Steel - FO349

Sale price$83.99
Free Shipping

Product Video:


GALVANIZED STEEL BOAT ANCHOR: Constructed From Hot Dipped Galvanized Steel. It has all the CQR/Plow Anchor Features. Recommended for Boat Length Up to 35 Ft.

CQR STYLE: This design allows rotation over 70 degrees in any one direction, which means that it is more responsive to wind and tide changes, making it less likely to unset.

EXTREME HOLDING POWER: The hinged plow performs well in a variety of seafloor conditions including mud, rock, and grass. Hinged Plow Design and Strong Hold on a bow roller.

FEATURES: Each anchor includes a Tripline Eye to allow for an easier breakout. Self-Stabilizing.

MEASUREMENTS: Weight: 15.5 Lb / 7 Kg. Dimension - (A): 25-1/2 Inch (648mm). (B): 9 Inch (229mm). (C): 12-5/8 Inch (321mm). (D): 20-3/4 Inch (527mm). (E): 22-11/16 inches (576mm). (F): 8-1/4 inches (210mm).

[Important Notice]: All of our Anchor and Docking products (like Windlasses, Anchors, Anchor Rodes, Anchor Rollers, Dock Lines, Mooring Accessories, Quicklinks, Chains, Shackles and Swivels) are recommended for use under normal weather and sea conditions. In case of extreme circumstances such as hurricanes, etc, the right precautions must be taken.

Five Oceans/Baron USA will not be responsible if the products are used under unusual weather and sea conditions.

PRODUCT NUMBER: 349

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
A
Allen Wolfe
CQR Style Plow Anchor, 15.5 Lb / 7 Kg, Hot Dipped Galvanized Steel - FO349?

The anchor was fine except for one important detail: the anchor shaft at the point of connection to the anchor rode was so thick I could not locate a shackle that would fit. All shackles with a mouth wide enough to fit over the end of the thick shaft had pins that were too thick to slide through the small hole at the end of the shaft. I did not want to drill out the hole as that would have ruined the galvanization in that area. I took the anchor to a local welder who fabricated a stainless steel shackle which will work fine...for $148.00! The anchor should be redesigned with a narrower shaft end to accommodate standard size shackles.